

Description of Keys in `config` and `cluster.spec` ¶

This list is not complete but aims to document any keys that are less than self-explanatory. Our go.dev reference provides a more detailed list of API values. ClusterSpec, defined as kind: Cluster in YAML, and InstanceGroupSpec, defined as kind: InstanceGroup in YAML, are the two top-level API values used to describe a cluster.

spec ¶

api ¶

This object configures how we expose the API:

dns will allow direct access to master instances, and configure DNS to point directly to the master nodes.
loadBalancer will configure a load balancer (ELB) in front of the master nodes, and configure DNS to point to the ELB.

DNS example:

spec:
  api:
    dns: {}

When configuring a LoadBalancer, you can also choose to have a public ELB or an internal (VPC only) ELB. The type field should be Public or Internal.

Also, you can add precreated additional security groups to the load balancer by setting additionalSecurityGroups.

spec:
  api:
    loadBalancer:
      type: Public
      additionalSecurityGroups:
      - sg-xxxxxxxx
      - sg-xxxxxxxx

Additionally, you can increase idle timeout of the load balancer by setting its idleTimeoutSeconds. The default idle timeout is 5 minutes, with a maximum of 3600 seconds (60 minutes) being allowed by AWS. For more information see configuring idle timeouts.

spec:
  api:
    loadBalancer:
      type: Public
      idleTimeoutSeconds: 300

You can use a valid SSL Certificate for your API Server Load Balancer. Currently, only AWS is supported:

spec:
  api:
    loadBalancer:
      type: Public
      sslCertificate: arn:aws:acm:<region>:<accountId>:certificate/<uuid>

Openstack only As of Kops 1.12.0 it is possible to use the load balancer internally by setting the useForInternalApi: true. This will point both masterPublicName and masterInternalName to the load balancer. You can therefore set both of these to the same value in this configuration.

spec:
  api:
    loadBalancer:
      type: Internal
      useForInternalApi: true

You can also set the API load balancer to be cross-zone:

spec:
  api:
    loadBalancer:
      crossZoneLoadBalancing: true

etcdClusters v3 & tls ¶

Although kops doesn't presently default to etcd3, it is possible to turn on both v3 and TLS authentication for communication amongst cluster members. These options may be enabled via the cluster spec (manifests only i.e. no command line options as yet). An upfront warning; at present no upgrade path exists for migrating from v2 to v3 so DO NOT try to enable this on a v2 running cluster as it must be done on cluster creation. The below example snippet assumes a HA cluster of three masters.

etcdClusters:
- etcdMembers:
  - instanceGroup: master0-az0
    name: a-1
  - instanceGroup: master1-az0
    name: a-2
  - instanceGroup: master0-az1
    name: b-1
  enableEtcdTLS: true
  name: main
  version: 3.0.17
- etcdMembers:
  - instanceGroup: master0-az0
    name: a-1
  - instanceGroup: master1-az0
    name: a-2
  - instanceGroup: master0-az1
    name: b-1
  enableEtcdTLS: true
  name: events
  version: 3.0.17

Note: The images for etcd that kops uses are from the Google Cloud Repository. Google doesn't release every version of etcd to the gcr. Check that the version of etcd you want to use is available at the gcr before using it in your cluster spec.

By default, the Volumes created for the etcd clusters are gp2 and 20GB each. The volume size, type and Iops( for io1) can be configured via their parameters. Conversion between gp2 and io1 is not supported, nor are size changes.

As of Kops 1.12.0 it is also possible to specify the requests for your etcd cluster members using the cpuRequest and memoryRequest parameters.

etcdClusters:
- etcdMembers:
  - instanceGroup: master-us-east-1a
    name: a
    volumeType: gp2
    volumeSize: 20
  name: main
- etcdMembers:
  - instanceGroup: master-us-east-1a
    name: a
    volumeType: io1
    # WARNING: bear in mind that the Iops to volume size ratio has a maximum of 50 on AWS!
    volumeIops: 100
    volumeSize: 21
  name: events
  cpuRequest: 150m
  memoryRequest: 512Mi

sshAccess ¶

This array configures the CIDRs that are able to ssh into nodes. On AWS this is manifested as inbound security group rules on the nodes and master security groups.

Use this key to restrict cluster access to an office ip address range, for example.

spec:
  sshAccess:
    - 12.34.56.78/32

kubernetesApiAccess ¶

This array configures the CIDRs that are able to access the kubernetes API. On AWS this is manifested as inbound security group rules on the ELB or master security groups.

Use this key to restrict cluster access to an office ip address range, for example.

spec:
  kubernetesApiAccess:
    - 12.34.56.78/32

cluster.spec Subnet Keys ¶

id ¶

ID of a subnet to share in an existing VPC.

egress ¶

The resource identifier (ID) of something in your existing VPC that you would like to use as "egress" to the outside world.

This feature was originally envisioned to allow re-use of NAT gateways. In this case, the usage is as follows. Although NAT gateways are "public"-facing resources, in the Cluster spec, you must specify them in the private subnet section. One way to think about this is that you are specifying "egress", which is the default route out from this private subnet.

spec:
  subnets:
  - cidr: 10.20.64.0/21
    name: us-east-1a
    egress: nat-987654321
    type: Private
    zone: us-east-1a
  - cidr: 10.20.32.0/21
    name: utility-us-east-1a
    id: subnet-12345
    type: Utility
    zone: us-east-1a

In the case that you don't use NAT gateways or internet gateways, Kops 1.12.0 introduced the "External" flag for egress to force kops to ignore egress for the subnet. This can be useful when other tools are used to manage egress for the subnet such as virtual private gateways. Please note that your cluster may need to have access to the internet upon creation, so egress must be available upon initializing a cluster. This is intended for use when egress is managed external to kops, typically with an existing cluster.

spec:
  subnets:
  - cidr: 10.20.64.0/21
    name: us-east-1a
    egress: External
    type: Private
    zone: us-east-1a

publicIP ¶

The IP of an existing EIP that you would like to attach to the NAT gateway.

spec:
  subnets:
  - cidr: 10.20.64.0/21
    name: us-east-1a
    publicIP: 203.93.148.142
    type: Private
    zone: us-east-1a

kubeAPIServer ¶

This block contains configuration for the kube-apiserver.

oidc flags for Open ID Connect Tokens ¶

Read more about this here: https://kubernetes.io/docs/admin/authentication/#openid-connect-tokens

spec:
  kubeAPIServer:
    oidcIssuerURL: https://your-oidc-provider.svc.cluster.local
    oidcClientID: kubernetes
    oidcUsernameClaim: sub
    oidcUsernamePrefix: "oidc:"
    oidcGroupsClaim: user_roles
    oidcGroupsPrefix: "oidc:"
    oidcCAFile: /etc/kubernetes/ssl/kc-ca.pem
    oidcRequiredClaim:
        - "key=value"

audit logging ¶

Read more about this here: https://kubernetes.io/docs/admin/audit

spec:
  kubeAPIServer:
    auditLogPath: /var/log/kube-apiserver-audit.log
    auditLogMaxAge: 10
    auditLogMaxBackups: 1
    auditLogMaxSize: 100
    auditPolicyFile: /srv/kubernetes/audit.yaml

Note: The auditPolicyFile is needed. If the flag is omitted, no events are logged.

You could use the fileAssets feature to push an advanced audit policy file on the master nodes.

Example policy file can be found here

dynamic audit configuration ¶

Read more about this here: https://kubernetes.io/docs/tasks/debug-application-cluster/audit/#dynamic-backend

spec:
  kubeAPIServer:
    auditDynamicConfiguration: true

By enabling this feature you are allowing for auditsinks to be registered with the API server. For information on audit sinks please read Audit Sink. This feature is only supported in kubernetes versions greater than 1.13. Currently, this feature is alpha and requires enabling the feature gate and a runtime config.

Note For kubernetes versions greater than 1.13, this is an alpha feature that requires the API auditregistration.k8s.io/v1alpha1 to be enabled as a runtime-config option, and the feature gate DynamicAuditing to be also enabled. The options --feature-gates=DynamicAuditing=true and --runtime-config=auditregistration.k8s.io/v1alpha1=true must be enabled on the API server in addition to this flag. See the sections for how to enable feature gates here. See the section on how to enable alphas APIs in the runtime config here.
Also, an audit policy should be provided in the file assets section. If the flag is omitted, no events are logged. You could use the fileAssets feature to push an advanced audit policy file on the master nodes.

Example policy file can be found here

bootstrap tokens ¶

Read more about this here: https://kubernetes.io/docs/reference/access-authn-authz/bootstrap-tokens/

spec:
  kubeAPIServer:
    enableBootstrapTokenAuth: true

By enabling this feature you instructing two things; - master nodes will bypass the bootstrap token but they will build kubeconfigs with unique usernames in the system:nodes group (this ensure's the master nodes confirm with the node authorization mode https://kubernetes.io/docs/reference/access-authn-authz/node/) - secondly the nodes will be configured to use a bootstrap token located by default at /var/lib/kubelet/bootstrap-kubeconfig (though this can be override in the kubelet spec). The nodes will sit the until a bootstrap file is created and once available attempt to provision the node.

Note enabling bootstrap tokens does not provision bootstrap tokens for the worker nodes. Under this configuration it is assumed a third-party process is provisioning the tokens on behalf of the worker nodes. For the full setup please read Node Authorizer Service

Max Requests Inflight ¶

The maximum number of non-mutating requests in flight at a given time. When the server exceeds this, it rejects requests. Zero for no limit. (default 400)

spec:
  kubeAPIServer:
    maxRequestsInflight: 1000

The maximum number of mutating requests in flight at a given time. When the server exceeds this, it rejects requests. Zero for no limit. (default 200)

spec:
  kubeAPIServer:
    maxMutatingRequestsInflight: 450

runtimeConfig ¶

Keys and values here are translated into --runtime-config values for kube-apiserver, separated by commas.

Use this to enable alpha features, for example:

spec:
  kubeAPIServer:
    runtimeConfig:
      batch/v2alpha1: "true"
      apps/v1alpha1: "true"

Will result in the flag --runtime-config=batch/v2alpha1=true,apps/v1alpha1=true. Note that kube-apiserver accepts true as a value for switch-like flags.

serviceNodePortRange ¶

This value is passed as --service-node-port-range for kube-apiserver.

spec:
  kubeAPIServer:
    serviceNodePortRange: 30000-33000

Disable Basic Auth ¶

This will disable the passing of the --basic-auth-file flag.

spec:
  kubeAPIServer:
    disableBasicAuth: true

targetRamMb ¶

Memory limit for apiserver in MB (used to configure sizes of caches, etc.)

spec:
  kubeAPIServer:
    targetRamMb: 4096

eventTTL ¶

How long API server retains events. Note that you must fill empty units of time with zeros.

spec:
  kubeAPIServer:
    eventTTL: 03h0m0s

externalDns ¶

This block contains configuration options for your external-DNS provider. The current external-DNS provider is the kops dns-controller, which can set up DNS records for Kubernetes resources. dns-controller is scheduled to be phased out and replaced with external-dns.

spec:
  externalDns:
    watchIngress: true

Default kops behavior is false. watchIngress: true uses the default dns-controller behavior which is to watch the ingress controller for changes. Set this option at risk of interrupting Service updates in some cases.

kubelet ¶

This block contains configurations for kubelet. See https://kubernetes.io/docs/admin/kubelet/

NOTE: Where the corresponding configuration value can be empty, fields can be set to empty in the spec, and an empty string will be passed as the configuration value. yamlspec:kubelet:resolvConf: ""

Will result in the flag --resolv-conf= being built.

Disable CPU CFS Quota ¶

To disable CPU CFS quota enforcement for containers that specify CPU limits (default true) we have to set the flag --cpu-cfs-quota to false on all the kubelets. We can specify that in the kubelet spec in our cluster.yml.

spec:
  kubelet:
    cpuCFSQuota: false

Configure CPU CFS Period ¶

Configure CPU CFS quota period value (cpu.cfs_period_us). Example:

spec:
  kubelet:
    cpuCFSQuotaPeriod: "100ms"

Enable Custom metrics support ¶

To use custom metrics in kubernetes as per custom metrics doc we have to set the flag --enable-custom-metrics to true on all the kubelets. We can specify that in the kubelet spec in our cluster.yml.

spec:
  kubelet:
    enableCustomMetrics: true

Setting kubelet CPU management policies ¶

Kops 1.12.0 added support for enabling cpu management policies in kubernetes as per cpu management doc we have to set the flag --cpu-manager-policy to the appropriate value on all the kubelets. This must be specified in the kubelet spec in our cluster.yml.

spec:
  kubelet:
    cpuManagerPolicy: static

Setting kubelet configurations together with the Amazon VPC backend ¶

Setting kubelet configurations together with the networking Amazon VPC backend requires to also set the cloudProvider: aws setting in this block. Example:

spec:
  kubelet:
    enableCustomMetrics: true
    cloudProvider: aws
...
...
  cloudProvider: aws
...
...
  networking:
    amazonvpc: {}

Configure a Flex Volume plugin directory ¶

An optional flag can be provided within the KubeletSpec to set a volume plugin directory (must be accessible for read/write operations), which is additionally provided to the Controller Manager and mounted in accordingly.

Kops will set this for you based off the Operating System in use: - ContainerOS: /home/kubernetes/flexvolume/ - CoreOS: /var/lib/kubelet/volumeplugins/ - Default (in-line with upstream k8s): /usr/libexec/kubernetes/kubelet-plugins/volume/exec/

If you wish to override this value, it can be done so with the following addition to the kubelet spec:

spec:
  kubelet:
    volumePluginDirectory: /provide/a/writable/path/here

kubeScheduler ¶

This block contains configurations for kube-scheduler. See https://kubernetes.io/docs/admin/kube-scheduler/

yamlspec:kubeScheduler:usePolicyConfigMap: true

Will make kube-scheduler use the scheduler policy from configmap "scheduler-policy" in namespace kube-system.

Note that as of Kubernetes 1.8.0 kube-scheduler does not reload its configuration from configmap automatically. You will need to ssh into the master instance and restart the Docker container manually.

kubeDNS ¶

This block contains configurations for kube-dns.

yamlspec:kubeDNS:provider: KubeDNS

Specifying KubeDNS will install kube-dns as the default service discovery.

yamlspec:kubeDNS:provider: CoreDNS

This will install CoreDNS instead of kube-dns.

If you are using CoreDNS and want to use an entirely custom CoreFile you can do this by specifying the file. This will not work with any other options which interact with the default CoreFile. You can also override the version of the CoreDNS image used to use a different registry or version by specifying CoreDNSImage.

Note: If you are using this functionality you will need to be extra vigilant on version changes of CoreDNS for changes in functionality of the plugins being used etc.

spec:
  kubeDNS:
    provider: CoreDNS
    coreDNSImage: mirror.registry.local/mirrors/coredns:1.3.1
    externalCoreFile: |
      amazonaws.com:53 {
            errors
            log . {
                class denial error
            }
            health :8084
            prometheus :9153
            proxy . 169.254.169.253 {
            }
            cache 30
        }
        .:53 {
            errors
            health :8080
            autopath @kubernetes
            kubernetes cluster.local {
                pods verified
                upstream 169.254.169.253
                fallthrough in-addr.arpa ip6.arpa
            }
            prometheus :9153
            proxy . 169.254.169.253
            cache 300
        }

Note: If you are upgrading to CoreDNS, kube-dns will be left in place and must be removed manually (you can scale the kube-dns and kube-dns-autoscaler deployments in the kube-system namespace to 0 as a starting point). The kube-dns Service itself should be left in place, as this retains the ClusterIP and eliminates the possibility of DNS outages in your cluster. If you would like to continue autoscaling, update the kube-dns-autoscaler Deployment container command for --target=Deployment/kube-dns to be --target=Deployment/coredns.

kubeControllerManager ¶

This block contains configurations for the controller-manager.

spec:
  kubeControllerManager:
    horizontalPodAutoscalerSyncPeriod: 15s
    horizontalPodAutoscalerDownscaleDelay: 5m0s
    horizontalPodAutoscalerDownscaleStabilization: 5m
    horizontalPodAutoscalerUpscaleDelay: 3m0s
    horizontalPodAutoscalerTolerance: 0.1
    experimentalClusterSigningDuration: 8760h0m0s

For more details on horizontalPodAutoscaler flags see the official HPA docs and the Kops guides on how to set it up.

Feature Gates ¶

spec:
  kubelet:
    featureGates:
      Accelerators: "true"
      AllowExtTrafficLocalEndpoints: "false"

Will result in the flag --feature-gates=Accelerators=true,AllowExtTrafficLocalEndpoints=false

NOTE: Feature gate ExperimentalCriticalPodAnnotation is enabled by default because some critical components like kube-proxy depend on its presence.

Some feature gates also require the featureGates setting to be used on other components - e.g. PodShareProcessNamespace requires the feature gate to be enabled on the api server:

spec:
  kubelet:
    featureGates:
      PodShareProcessNamespace: "true"
  kubeAPIServer:
    featureGates:
      PodShareProcessNamespace: "true"

For more information, see the feature gate documentation

Compute Resources Reservation ¶

spec:
  kubelet:
    kubeReserved:
        cpu: "100m"
        memory: "100Mi"
        ephemeral-storage: "1Gi"
    kubeReservedCgroup: "/kube-reserved"
    systemReserved:
        cpu: "100m"
        memory: "100Mi"
        ephemeral-storage: "1Gi"
    systemReservedCgroup: "/system-reserved"
    enforceNodeAllocatable: "pods,system-reserved,kube-reserved"

Will result in the flag --kube-reserved=cpu=100m,memory=100Mi,ephemeral-storage=1Gi --kube-reserved-cgroup=/kube-reserved --system-reserved=cpu=100m,memory=100Mi,ephemeral-storage=1Gi --system-reserved-cgroup=/system-reserved --enforce-node-allocatable=pods,system-reserved,kube-reserved

Learn more about reserving compute resources.

networkID ¶

On AWS, this is the id of the VPC the cluster is created in. If creating a cluster from scratch, this field does not need to be specified at create time; kops will create a VPC for you.

spec:
  networkID: vpc-abcdefg1

More information about running in an existing VPC is here.

hooks ¶

Hooks allow for the execution of an action before the installation of Kubernetes on every node in a cluster. For instance you can install Nvidia drivers for using GPUs. This hooks can be in the form of Docker images or manifest files (systemd units). Hooks can be placed in either the cluster spec, meaning they will be globally deployed, or they can be placed into the instanceGroup specification. Note: service names on the instanceGroup which overlap with the cluster spec take precedence and ignore the cluster spec definition, i.e. if you have a unit file 'myunit.service' in cluster and then one in the instanceGroup, only the instanceGroup is applied.

When creating a systemd unit hook using the manifest field, the hook system will construct a systemd unit file for you. It creates the [Unit] section, adding an automated description and setting Before and Requires values based on the before and requires fields. The value of the manifest field is used as the [Service] section of the unit file. To override this behavior, and instead specify the entire unit file yourself, you may specify useRawManifest: true. In this case, the contents of the manifest field will be used as a systemd unit, unmodified. The before and requires fields may not be used together with useRawManifest.

spec:
  # many sections removed

  # run a docker container as a hook
  hooks:
  - before:
    - some_service.service
    requires:
    - docker.service
    execContainer:
      image: kopeio/nvidia-bootstrap:1.6
      # these are added as -e to the docker environment
      environment:
        AWS_REGION: eu-west-1
        SOME_VAR: SOME_VALUE

  # or construct a systemd unit
  hooks:
  - name: iptable-restore.service
    roles:
    - Node
    - Master
    before:
    - kubelet.service
    manifest: |
      EnvironmentFile=/etc/environment
      # do some stuff

  # or use a raw systemd unit
  hooks:
  - name: iptable-restore.service
    roles:
    - Node
    - Master
    useRawManifest: true
    manifest: |
      [Unit]
      Description=Restore iptables rules
      Before=kubelet.service
      [Service]
      EnvironmentFile=/etc/environment
      # do some stuff

  # or disable a systemd unit
  hooks:
  - name: update-engine.service
    disabled: true

  # or you could wrap this into a full unit
  hooks:
  - name: disable-update-engine.service
    before:
    - update-engine.service
    manifest: |
      Type=oneshot
      ExecStart=/usr/bin/systemctl stop update-engine.service

Install Ceph

spec:
  # many sections removed
  hooks:
  - execContainer:
      command:
      - sh
      - -c
      - chroot /rootfs apt-get update && chroot /rootfs apt-get install -y ceph-common
      image: busybox

Install cachefilesd

spec:
  # many sections removed
  hooks:
  - before:
    - kubelet.service
    manifest: |
      Type=oneshot
      ExecStart=/sbin/modprobe cachefiles
    name: cachefiles.service
  - execContainer:
      command:
      - sh
      - -c
      - chroot /rootfs apt-get update && chroot /rootfs apt-get install -y cachefilesd
        && chroot /rootfs sed -i s/#RUN/RUN/ /etc/default/cachefilesd && chroot /rootfs
        service cachefilesd restart
      image: busybox

fileAssets ¶

FileAssets is an alpha feature which permits you to place inline file content into the cluster and instanceGroup specification. It's designated as alpha as you can probably do this via kubernetes daemonsets as an alternative.

spec:
  fileAssets:
  - name: iptable-restore
    # Note if not path is specified the default path it /srv/kubernetes/assets/<name>
    path: /var/lib/iptables/rules-save
    roles: [Master,Node,Bastion] # a list of roles to apply the asset to, zero defaults to all
    content: |
      some file content

cloudConfig ¶

disableSecurityGroupIngress ¶

If you are using aws as cloudProvider, you can disable authorization of ELB security group to Kubernetes Nodes security group. In other words, it will not add security group rule. This can be useful to avoid AWS limit: 50 rules per security group.

spec:
  cloudConfig:
    disableSecurityGroupIngress: true

elbSecurityGroup ¶

WARNING: this works only for Kubernetes version above 1.7.0.

To avoid creating a security group per elb, you can specify security group id, that will be assigned to your LoadBalancer. It must be security group id, not name. api.loadBalancer.additionalSecurityGroups must be empty, because Kubernetes will add rules per ports that are specified in service file. This can be useful to avoid AWS limits: 500 security groups per region and 50 rules per security group.

spec:
  cloudConfig:
    elbSecurityGroup: sg-123445678

docker ¶

It is possible to override Docker daemon options for all masters and nodes in the cluster. See the API docs for the full list of options.

registryMirrors ¶

If you have a bunch of Docker instances (physical or vm) running, each time one of them pulls an image that is not present on the host, it will fetch it from the internet (DockerHub). By caching these images, you can keep the traffic within your local network and avoid egress bandwidth usage. This setting benefits not only cluster provisioning but also image pulling.

@see Cache-Mirror Dockerhub For Speed @see Configure the Docker daemon.

spec:
  docker:
    registryMirrors:
    - https://registry.example.com

Skip Install ¶

If you want nodeup to skip the Docker installation tasks, you can do so with:

spec:
  docker:
    skipInstall: true

NOTE: When this field is set to true, it is entirely up to the user to install and configure Docker.

storage ¶

The Docker Storage Driver can be specified in order to override the default. Be sure the driver you choose is supported by your operating system and docker version.

docker:
  storage: devicemapper
  storageOpts:
    - "dm.thinpooldev=/dev/mapper/thin-pool"
    - "dm.use_deferred_deletion=true"
    - "dm.use_deferred_removal=true"

sshKeyName ¶

In some cases, it may be desirable to use an existing AWS SSH key instead of allowing kops to create a new one. Providing the name of a key already in AWS is an alternative to --ssh-public-key.

spec:
  sshKeyName: myexistingkey

If you want to create your instance without any SSH keys you can set this to an empty string:

spec:
  sshKeyName: ""

useHostCertificates ¶

Self-signed certificates towards Cloud APIs. In some cases Cloud APIs do have self-signed certificates.

spec:
  useHostCertificates: true

Optional step: add root certificates to instancegroups root ca bundle ¶

  additionalUserData:
  - name: cacert.sh
    type: text/x-shellscript
    content: |
      #!/bin/sh
      cat > /usr/local/share/ca-certificates/mycert.crt <<EOF
      -----BEGIN CERTIFICATE-----
snip
      -----END CERTIFICATE-----
      EOF
      update-ca-certificates

NOTE: update-ca-certificates is command for debian/ubuntu. That command is different depending your OS.

target ¶

In some use-cases you may wish to augment the target output with extra options. target supports a minimal amount of options you can do this with. Currently only the terraform target supports this, but if other use cases present themselves, kops may eventually support more.

spec:
  target:
    terraform:
      providerExtraConfig:
        alias: foo

assets ¶

Assets define alternative locations from where to retrieve static files and containers

containerRegistry ¶

The container registry enables kops / kubernetes to pull containers from a managed registry. This is useful when pulling containers from the internet is not an option, eg. because the deployment is offline / internet restricted or because of special requirements that apply for deployed artifacts, eg. auditing of containers.

For a use case example, see How to use kops in AWS China Region

spec:
  assets:
    containerRegistry: example.com/registry

containerProxy ¶

The container proxy is designed to acts as a pull through cache for docker container assets. Basically, what it does is it remaps the Kubernetes image URL to point to you cache so that the docker daemon will pull the image from that location. If, for example, the containerProxy is set to proxy.example.com, the image k8s.gcr.io/kube-apiserver will be pulled from proxy.example.com/kube-apiserver instead. Note that the proxy you use has to support this feature for private registries.

spec:
  assets:
    containerProxy: proxy.example.com

Setting Custom Kernel Runtime Parameters ¶

To add custom kernel runtime parameters to your all instance groups in the cluster, specify the sysctlParameters field as an array of strings. Each string must take the form of variable=value the way it would appear in sysctl.conf (see also sysctl(8) manpage).

You could also use the sysctlParameters field on the instance group to specify different parameters for each instance group.

Unlike a simple file asset, specifying kernel runtime parameters in this manner would correctly invoke sysctl --system automatically for you to apply said parameters.

For example:

spec:
  sysctlParameters:
    - fs.pipe-user-pages-soft=524288
    - net.ipv4.tcp_keepalive_time=200

which would end up in a drop-in file on all masters and nodes of the cluster.

Description of Keys in config and cluster.spec ¶